PDF下载 分享
[1]刘丽艳,韩忠立,赵承卓,等. 热处理对蒸汽发生器用国产690 合金管显微组织和显微硬度的影响[J].天津大学学报(自然科学与工程技术版),2020,53(08):795-802.[doi:10.11784/tdxbz201907070]
 Liu Liyan,Han Zhongli,Zhao Chengzhuo,et al. Effects of Heat Treatment on the Microstructure and Microhardness of Domestic Alloy 690 Tube in Steam Generator[J].Journal of Tianjin University(Science and Technology),2020,53(08):795-802.[doi:10.11784/tdxbz201907070]
点击复制

 热处理对蒸汽发生器用国产690 合金管显微组织和显微硬度的影响

参考文献/References:

 [1] Zhang X YRen P DPeng J Fet al. Fretting wear behavior of Inconel 690 in hydrazine environments[J]. Transactions of Nonferrous Metals Society of China201424(2)360-367.

[2] Guo XLai PTang Let al. Effects of sliding amplitude and normal load on the fretting wear behavior of alloy 690 tube exposed to high temperature water[J]. Tribology International2017116155-163.

[3] 刘丽艳,苏?桐,郭?凯,等. 压水堆核电站蒸汽发生器二次侧两相流流场特性模拟[J]. 天津大学学报自然科学与工程技术版201952(7)745-753.

Liu LiyanSu TongGuo Kaiet al. Simulation of two-phase flow on the secondary side of PWR steam generator[J]. Journal of Tianjin UniversityScience and Technology201952(7)745-753(in Chinese).

[4] 孙家枢. 金属的磨损[M]. 北京:冶金工业出版社,1992.

Sun Jiashu. Metal Wear[M]. BeijingMetallurgical Industry Press1992(in Chinese).

[5] Budinski K G. Effect of hardness differential on metal-to-metal fretting damage[J]. Wear2013301(1/2)501-507.

[6] 郭军霞,陈秋龙,蔡?珣,等. DLC多层膜对1Cr18Ni9Ti钢微动磨损性能的影响[J]. 机械工程材料,200226(8)11-14.

Guo JunxiaChen QiulongCai Xunet al. The influence of diamond-like carbon-based multi-layer coating on fretting wear of 1Cr18Ni9Ti stainless steel[J]. Materials for Mechanical Engineering200226(8)11-14(in Chinese).

[7] Sung J HKim S SKim T H. Fretting damage of TiN coated zircaloy-4 tube[J]. Wear2001250(1)658-664.

[8] Wang QZhou FChen Ket al. Friction and wear properties of TiCN coatings sliding against SiC and steel balls in air and water[J]. Thin Solid Films2011519(15)4830-4841.

[9] 郝宪朝,陈?波,马颖澈,等. 热轧态Inconel690合金中碳化物的溶解和析出[J]. 材料研究学报,200923(6)668-672.

Hao XianchaoChen BoMa Yingcheet al. Dissolution and precipitation of carbide in hot-rolled Inconel alloy 690[J]. Chinese Journal of Materials Research200923(6)668-672(in Chinese).

[10] ?磊,焦少阳,董建新,等. 690合金等温热处理过程中晶界碳化物和贫铬区演化规律[J]. 机械工程学报,201046(12)48-52.

Zheng LeiJiao ShaoyangDong Jianxinet al. Evolution of grain boundary carbide and Cr-depletion region in alloy 690 during isothermal treatment[J]. Journal of Mechanical Engineering201046(12)48-52(in Chinese).

[11] 邓化凌,宋云京. 热处理对Inconel690合金晶粒变化和晶界析出物的影响[J]. 热加工工艺,201140(24)197-199.

Deng HualingSong Yunjing. Effects of heat treatment on grain size and precipitates in grain boundary for Inconel690 alloy[J]. Hot Working Technology201140(24)197-199(in Chinese).

[12] ?红,董建新,张麦仓,等. 固溶处理对Inconel 690合金组织影响[J]. 工程科学学报,2002(5)511-513.

Zhu HongDong JianxinZhang Maicanget al. Solid-solution effect on microstructure of Inconel690 superalloy[J]. Chinese Journal of Engineering2002(5)511-513(in Chinese).

[13] 戴新财. 固溶处理对Inconel600镍基合金的硬度影响机理研究[J]. 铸造技术,201839(8)1824-1827.

Dai Xincai. Study on the effect of solid solution treatment on the hardness influencing mechanism of Inconel600 nickel-base alloy[J]. Foundry Technology201839(8)1824-1827(in Chinese).

[14] ?刚,尹立孟,姚宗湘,等. 固溶处理对Inconel 600合金TIG接头组织和性能的影响[J]. 热加工工艺,201746(5)221-224.

Wang GangYin LimengYao Zongxianget al. Influence of solution treatment on microstructure and properties of Inconel600 alloy TIG welded joint[J]. Hot Working Technology201746(5)221-224(in Chinese).

[15] 袁晓飞,王美玲,丁贤飞,等. GH690合金管材热处理工艺优化[J]. 稀有金属材料与工程,201544(11)2887-2896.

Yuan XiaofeiWang MeilingDing Xianfeiet al. Optimization on heat treatment processes of GH690 tubes[J]. Rare Metal Materials and Engineering201544(11)2887-2896(in Chinese).

[16] Grey E AHiggins G T. Solute limited grain boundary migrationA rationalisation of grain growth[J]. Acta Metallurgica197321(4)309-321.

[17] 张钱珍,程世长,刘正东,等. Inconel 690合金TT处理后的析出相[J]. 钢铁研究学报,200912(6)40-44.

Zhang QianzhenCheng ShichangLiu Zhengdonget al. Precipitated phase of alloy Inconel 690 after thermal treatment[J]. Journal of Iron and Steel Research200912(6)40-44(in Chinese).

[18] Lee TSuh HHan Set al. Effect of a heat treatment on the precipitation behavior and tensile properties of alloy 690 steam generator tubes[J]. Journal of Nuclear Materials201647985-92.

[19] Kai J JYu G PTsai C Het al. The effects of heat treatment on the chromium depletionprecipitate evolutionand corrosion resistance of INCONEL alloy 690[J]. Metallurgical Transactions A198920(10)2057-2067.

[20] Hong JKim IPark Cet al. Microstructural effects on the fretting wear of Inconel 690 steam generator tube[J]. Wear2005259(1)349-355.

[21] 菅晓君,张明山,王俊升. 热处理工艺对6061铝合金硬度和导电率的影响[J]. 材料热处理学报,201940(1)83-90.

Jian XiaojunZhang MingshanWang Junsheng. Effect of heat treatment process on hardness and conductivity of 6061 aluminum alloy[J]. Transactions of Materials and Heat Treatment201940(1)83-90(in Chinese).

[22] 李会军,严毕玉,刘晨曦,等. Cr铁素体耐热钢高温热循环过程的组织演化规律[J]. 天津大学学报:自然科学与工程技术版,201851(7)729-734.

Li HuijunYan BiyuLiu Chenxiet al. Microstructure evolution of high Cr ferritic heat-resistant steel in high temperature thermal cycle[J]. Journal of Tianjin UniversityScience and Technology201851(7)729-734(in Chinese).

[23] Zhao ZLuo JLiu Yet al. Experimental investigation on the hardness of ultrafine-grained Si2N2O-Si3N4 composites developed by hot-press sintering technology[J]. Journal of the Ceramic Society of Japan2015123(1433)21-25.

[24] 徐桂芳,王?飞,严?羽,等. 新型低Ni不锈钢的组织与性能[J]. 金属热处理,201439(9)92-95.

Xu GuifangWang FeiYan Yuet al. Microstructure and mechanical properties of a novel low-Ni stainless steel[J]. Heat Treatment of Metals201439(9)92-95(in Chinese).

Park HKim YLee Bet al. Effect of heat treatment on fatigue crack growth rate of Inconel 690 and Inconel 600[J]. Journal of Nuclear Materials1996231(3)204-212.

相似文献/References:

[1]徐可欣,崔厚欣,王文波. 血糖无创伤检测技术的基础研究[J].天津大学学报(自然科学与工程技术版),2003,(02):133.
[2]李庆波,徐可欣,汪!日燕. 人体血糖浓度无创伤检测的必要测量条件[J].天津大学学报(自然科学与工程技术版),2003,(02):139.
[3]胡小唐,陈津平,胡晓东,等. 外界振动对SPM测量结果的影响[J].天津大学学报(自然科学与工程技术版),2003,(02):143.
[4]赵 臣,阴炳皓,韩晓军.TSR-1型微型足球机器人视觉系统的研究[J].天津大学学报(自然科学与工程技术版),2003,(06):659.
[5]刘!征,赵小松,张国雄,等. 自由曲面多目视觉检测技术[J].天津大学学报(自然科学与工程技术版),2003,(02):148.
[6]张金利,杨雪松,李!韦华,等. 非离子型表面活性剂水溶液胶团特性模型[J].天津大学学报(自然科学与工程技术版),2003,(02):152.
[7]王洪礼,李强,竺致文. 梯度算法在转子时变控制中的应用[J].天津大学学报(自然科学与工程技术版),2003,(02):156.
[8]张颖,顾平,谭丁. 膜混凝反应器处理轻度污染地表水[J].天津大学学报(自然科学与工程技术版),2003,(02):187.
[9]杨长生,马沛生,夏淑倩. 差热分析法测定多元醇的比热[J].天津大学学报(自然科学与工程技术版),2003,(02):192.
[10]于九皋,刘峰,于璟琳. 包覆包醛氧淀粉固定脲酶制备及对尿素吸附[J].天津大学学报(自然科学与工程技术版),2003,(02):197.

备注/Memo

 通信作者:谭 蔚,wtan@tju.edu.cn.

更新日期/Last Update: 2020-07-15