PDF下载 分享
[1]黄 康,杨 磊,徐 锐,等.基于加工模型的大重合度齿轮时变啮合刚度计算[J].天津大学学报(自然科学与工程技术版),2020,53(07):754-762.[doi:10.11784/tdxbz201907038]
 Huang Kang,Yang Lei,Xu Rui,et al.Calculation of Time-Varying Mesh Stiffness with High Contact Ratio Gear Based on Machining Model[J].Journal of Tianjin University(Science and Technology),2020,53(07):754-762.[doi:10.11784/tdxbz201907038]
点击复制

基于加工模型的大重合度齿轮时变啮合刚度计算

参考文献/References:

1 Ye S YTsai S J. A computerized method for loaded tooth contact analysis of high-contact-ratio spur gears with or without flank modification considering tip cor-ner contact and shaft misalignment[J]. Mechanism and Machine Theory201697190-214.

2 Pandya Y. Crack behavior in a high contact ratio spur gear tooth and its effect on mesh stiffness[J]. Engi-neering Failure Analysis201334(34)69-78

3 李发家. 大重合度行星齿轮传动系统强度及动力学研究[D]. 南京:南京航空航天大学,2015.

Li Fajia. The Strength and Dynamics Analysis of Hight Contact Ratio Planetary Gear Transmission[D]. Nan-jingNanjing University of Aeronautics and Astro-nautics2015(in Chinese).

4 Nishino T. Integrated excitation models of the helical gear system[C]//ASME Design Engineering Technical Conferences. Las VegasNVUSA2007DETC2007-34134.

5 Liang X HLiu Z LPan Jet al. Spur gear tooth pitting propagation assessment using model-based anal-ysis[J]. Chinese Journal of Mechanical Engineering201730(6)1369-1382.

6 . 大重合度变速器齿轮的承载能力研究[D]. 合肥:合肥工业大学,2014.

Zhang Juan. Study on the Bearing Capacity of Trans-mission Gears with Large Coincidence[D]. HefeiHefei University of Technology2014(in Chinese).

7 Alves J TWang JGuingand M. Static and dynamic models for spiral bevel gears[J]. Mechanics & Industry201313(5)325-335.

8 李亚鹏. 齿轮时变啮合刚度改进算法基刚度激励研究[D]. 大连:大连理工大学,2009.

Li Yapeng. Study on Improved Algorithm of the Time-Varying Meshing Stiffness of Gear and Stiffness Exci-tation[D]. DalianDalian University of Technology2009 (in Chinese)

9 Yang D C HLin J Y. Hertzian dampingtooth friction and bending elasticity in gear impact dynamics[J]. Journal of MechanismsTransmissionsand Automa-tion in Design1987109(2)189-196.

10 Wu S. Gearbox Dynamic Simulation and Estimation of Fault Growth[D]. EdmontonUniversity of Alberta2007.

11 Wu SZuo M JParey A. Simulation of spur gear dynamics and estimation of fault growth[J]. Journal of Sound and Vibration2008317(3/4/5)608-624.

12 Zhou XShao YLei YZuo M. Time-varying mesh-ing stiffness calculation and vibration analysis for a 16DOF dynamic model with linear crack growth in a pinion[J]. ASME J Vib Acoust2011134(1)011011-1-011011-11.

13 万志国,訾艳阳,曹宏瑞,等. 时变啮合刚度算法修正与齿根裂纹动力学建模[J]. 机械工程学报,201349(11)153-160.

Wan ZhiguoZi YanyangCao Hongruiet al. Time­varying mesh stiffness algorithm correction and tooth crack dynamic modeling[J]. Journal of Mechan-ical Engineering201349(11)153-160(in Chi-nese).

14 辉,逄 旭,宋溶泽,等. 基于改进能量法的直齿轮时变啮合刚度计算[J]. 东北大学学报:自然科学版,201435(6)863-866884.

Ma HuiPang XuSong Rongzeet al. Time-varying meshing stiffness calculation of spur gears based on improved energy method[J]. Journal of Northeast UniversityNatural Science201435(6)863-866884(in Chinese).

15 Yong YJia X WQing H Zet al. Mesh stiffness modeling considering actual tooth profile geometry for a spur gear pair[J]. Mechanics & Industry201819(3)306-320.

16 . 齿轮滚刀快速选配系统的研究与开发[D]. 重庆:重庆大学,2010.

Xu Rui. Research and Development of Rapid Selection and Matching System for Gear Hobs[D]. ChongqingChongqing University2010(in Chinese).

17 Chen Z GShao Y M. Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth[J]. Engineering Failure Analysis201118(8)2149-2164.

18 Cornell R W. Compliance and stress sensitivity of spur gear teeth[J]. Journal of Mechanical Design1981103(2)447.

19 Sainsot PVelex PDuverger O. Contribution of gear body to tooth deflectionsA new bidimensional ana-lytical formula[J]. Journal of Mechanical Design2004126748-752.

20 Chaari FBaccar MAbbes M Set al. Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmis-sion[J]. European Journal of Mechanics-A Solids200827(4)691-705.

21 贵新成,李立顺,李红勋,等. 大重合度摆线内齿轮副时变啮合刚度计算与齿间载荷分配研究[J]. 机械工程学报,201854(21)101-112.

Gui XinchengLi LishunLi Hongxunet al. Time-varying mesh stiffness calculation and load distribution among teeth of cycloid internal gear pair with high con-tact ratio[J]. Journal of Mechanical Engineering201854(21)101-112 (in Chinese)

22 欣,邓康耀,田中旭,等. 渐开线齿轮传动的扭转刚度研究[J]. 机械传动,2017(6)55-60.

Zhou XinDeng KangyaoTian Zhongxuet al. Re-search of the torsion stiffness of involute gear trans-mission[J]. Journal of Mechanical Transmission2017(6)55-60(in Chinese).


备注/Memo

通信作者:杨 磊,1073428125@qq.com.

更新日期/Last Update: 2020-06-07