PDF下载 分享
[1]王晓静,张照汶,王锡尧,等.PTA 干燥机搅拌系统有限元分析方法研究[J].天津大学学报(自然科学与工程技术版),2020,53(02):214-220.[doi:10.11784/tdxbz201901023]
 Wang Xiaojing,Zhang Zhaowen,Wang Xiyao,et al.Finite Element Analysis Method for PTA Dryer Stirring System[J].Journal of Tianjin University(Science and Technology),2020,53(02):214-220.[doi:10.11784/tdxbz201901023]
点击复制

PTA 干燥机搅拌系统有限元分析方法研究

参考文献/References:

[1] 王艳艳,王团结,彭 敏. 常用干燥设备的应用及其选用原则研究[J]. 机电信息,2017(2):1-16.

Wang Yanyan,Wang Tuanjie,Peng Min. Application of common drying equipment and its selection princi-ples[J]. Mechanical and Electronic Information,2017(2):1-16(in Chinese).

[2] 万风岭,谢苏江,周昭军. 干燥设备的现状及发展趋势[J]. 化工装备技术,2006(1):10-12.

Wan Fengling,Xie Sujiang,Zhou Zhaojun. The cur-rent situation and development trend of drying equip-ment [J]. Chemical Equipment Technology,2006 (1):10-12(in Chinese).

[3] 倪春林,史元芝,马训强,等. 适合高湿、高黏物料的干燥设备的研究与应用[J]. 山东化工,2009,38(8):32-35.

Ni Chunlin,Shi Yuanzhi,Ma Xunqiang,et al. Study and development of drying system for waterish and sticky material[J]. Shandong Chemical Industry,2009,38(8):32-35(in Chinese).

[4] 张素梅. 回转式圆筒干燥机设计[J]. 科技创新与应用,2015(28):45-45.

Zhang Sumei. Design of rotary cylinder dryer[J]. Sci-ence and Technology Innovation and Application,2015(28):45-45(in Chinese).

[5] 杨连红,王 强,赵胜强. 基于ANSYS的PTA干燥机的有限元分析[J]. 石油和化工设备,2016,19(4):5-8.

Yang Lianhong,Wang Qiang,Zhao Shengqiang. Fi-nite element analysis of PTA dryer based on AN-SYS[J]. Petro-Chemical Equipment,2016,19(4):5-8(in Chinese).

[6] 祝明威,冯武文,习进朝. 某回转圆筒式干燥机的整体有限元分析[J]. 农机化研究,2007(12):64-67.

Zhu Mingwei,Feng Wuwen,Xi Jinchao. Finite ele-ment analysis on one kind of rotary dryer[J]. Journal of Agricultural Mechanization Research,2007(12):64-67(in Chinese).

[7] 刘 旺,郎 勇,李春宝. PTA干燥机进料机螺旋轴断裂原因分析及修复[J]. 化工设备与管道,2018(2):54-55.

Liu Wang,Lang Yong,Li Chunbao. Cause analysis and repair of fracture occurred in rotary shaft in feed-ing component in PTA dryer[J]. Process Equipment & Piping,2018(2):54-55(in Chinese).

[8] 余伟炜,高炳军. ANSYS在机械与化工装备中的应用[M]. 北京:中国水利水电出版社,2006.

Yu Weiwei,Gao Bingjun. Application of ANSYS in Mechanical and Chemical Equipment[M]. Beijing:China Water & Power Press,2006(in Chinese).

[9] 余联庆,梅顺齐,杜利珍,等. ANSYS在结构优化设计中的应用[J]. 中国水运:理论版,2007,5(3):78-79.

Yu Lianqing,Mei Shunqi,Du Lizhen,et al. Applica-tion of ANSYS in structural optimization design[J]. China Water Transport:Theoretical Edition,2007,5(3):78-79(in Chinese).

[10] Elksnin V,Priimak O. Application of mathematical modeling using super components for designing chemi-cal and oil and gas equipment[J]. Chemical & Petrole-um Engineering,2011,47(5/6):342-350.

[11] 李冬慧. 多晶硅固渣卧式干燥机搅拌系统力学分析及结构优化[D]. 天津:天津大学,2012.

Li Donghui. The Mechanical Analysis and Optimal De-sign of the Mixing Sstem in Horizontal Dryer[D]. Tian-jin:Tianjin University,2012(in Chinese).

[12] 王晓静,马东云. 异型热管反应器硅烷分解过程流场的数值模拟[J]. 天津大学学报:自然科学与工程技术版,2018,51(3):278-283.

Wang Xiaojing,Ma Dongyun. Numerical simulation of flow field in silane decomposition process of reactor with shaped heat pipes[J]. Journal of Tianjin Universi-ty:Science and Technology,2018,51(3):278-283(in Chinese).

[13] 黄益平,马东云,王晓静,等. 连续式干燥机搅拌系统力学分析及优化[J]. 石油化工设备,2016(6):32-37.

Huang Yiping,Ma Dongyun,Wang Xiaojing,et al. Development and mechanical analysis of continuous dryer for poly silicon slurry disposition[J]. Petro-Chemical Equipment,2016(6):32-37(in Chinese).


备注/Memo

通信作者:王晓静,tdxjwang@126.com.

更新日期/Last Update: 2020-02-13