PDF下载 分享
[1]余建星,等.含内部冲刷腐蚀损伤的90°弯管屈曲压力的研究[J].天津大学学报(自然科学与工程技术版),2020,53(02):111-121.[doi:10.11784/tdxbz201902050]
 Yu Jianxing,Jin Chenghang,et al.Research on the Buckling Stress of the 90° Elbow with Internal Erosion Corrosion Damage[J].Journal of Tianjin University(Science and Technology),2020,53(02):111-121.[doi:10.11784/tdxbz201902050]
点击复制

含内部冲刷腐蚀损伤的90°弯管屈曲压力的研究

参考文献/References:

[1] Yu Jianxing,Wang Huakun,Yu Yang,et al. Corrosion behavior of X65 pipeline steel:Comparison of wet-dry cycle and full immersion[J]. Corrosion Science,2018,133:276-287.

[2] Tian B R,Cheng Y F. Electrochemical corrosion behav-ior of X-65 steel in the simulated oil sand slurry(I):Effects of hydrodynamic condition[J]. Corrosion Science,2008,50(3):773-779.

[3] Hadavi V,Michaelsen B,Papini M. Measurements and modeling of instantaneous particle orientation within abra-sive air jets and implications for particle embedding[J]. Wear,2015,336/337:9-20.

[4] Kyriakides S,Netto T A. On the dynamic propagation and arrest of buckles in pipe-in-pipe systems[J]. Interna-tional Journal of Solids and Structures,2004,41(20);5463-5482.

[5] Yu Jianxing,Sun Zhenzhou,Liu Xiaoxie,et al. Ring-truss theory on offshore pipelines buckle propagation[J]. Thin-Walled Structures,2014,85:313-323.

[6] Miller A G. Review of limit loads of structures containing defects[J]. Int J Pressure Vessels Piping,1988,32:191-327.

[7] Goodall I W. Lower Bound Limit Analysis of Curved Tubes Loaded by Combined Internal Pressure and In-Plane Bending Moment[R]. CEGB Report RD/B/N4360. Central Electricity Generating Board,1978.

[8] Kim Yun-Jae,Oh Chang-Sik. Limit loads for pipe bends under combined pressure and in-plane bending based on finite element limit analysis[J]. International Journal of Pressure Vessels and Piping,2005,83(2):148-153.

[9] Hashem M M,Younan M Y A. Nonlinear analysis of pipe bends subjected to out of-plane moment loading and internal pressure[J]. J Press Vessels Technol,2001,123:253-258.

[10] Hashem M M,Younan M Y A. Limit-load analysis of pipe bends under out-of plane moment loading and internal pressure[J]. J Press Vessels Technol,2002,124:32-37.

[11] Li Jian,Zhou Changyu,Xue Jilin,et al. Limit loads for pipe bends under combined pressure and out-of-plane bending moment based on finite element analysis[J]. In-ternational Journal of Mechanical Sciences,2014,88:100-109.

[12] 王 岩,孙 亮,范德顺. 含局部减薄弯管的塑性极限载荷分析[J]. 北京化工大学学报,2005,32(1):62-65.

Wang Yan,Sun Liang,Fan Deshun. Plastic limit load analysis of elbow with local thinning[J]. Journal of Bei-jing University of Chemical Technology,2005,32(1):62-65(in Chinese).

[13] 郭茶秀,王学生,王定标,等. 复杂载荷下无缺陷弯管的塑性极限载荷[J]. 压力容器,2001,18(4):8-11.

Guo Chaxiu,Wang Xuesheng,Wang Dingbiao,et al. Plastic collapse load analysis of undefected pipe elbows under the complex loads[J]. Pressure Vessel Technology,2001,18(4):8-11(in Chinese).

[14] Solnordal C B,Wong C Y,Boulanger J. An experi-mental and numerical analysis of erosion caused by sand pneumatically conveyed through a standard pipe el-bow[J]. Wear,2015,336/337:43-57.

[15] 曾 莉. 管道弯管段冲刷腐蚀机理与流体动力学特征[D]. 武汉:华中科技大学,2017.

Zeng Li. Erosion-Corrosion Mechanism and Hydrody-namic Characteristics at an Elbow of Pipeline[D]. Wu Han:Huazhong University of Science and Technology,2017(in Chinese).

[16] Wang Huakun,Yu Yang,Yu Jianxing,et al. Effect of 3D random pitting defects on the collapse pressure of pipe—Part Ⅱ:Numerical analysis[J]. Thin-Wall Struc-tures,2018,129:527-541.

[17] Sakakibara N,Kyriakides S,Corona E. Collapse of partially corroded or worn pipe under external pres-sure[J]. International Journal of Mechanical Sciences,2008,50(12):1586-1597.

[18] 侯松涛,陈红雷. 对气力输送系统中弯头曲率半径的探讨[J]. 铸造设备与工艺,2013(2):7-8.

Hou Songtao,Chen Honglei. Study on elbow curvature radius in pneumatic conveying system[J]. Foundry Equipment and Technology,2013(2):7-8(in Chinese).


备注/Memo

通信作者:余 杨,yang.yu@tju.edu.cn.

更新日期/Last Update: 2020-02-07