PDF下载/HTML 分享
[1]刘丽艳,苏 桐,郭 凯,等.压水堆核电站蒸汽发生器二次侧两相流流场特性模拟[J].天津大学学报(自然科学与工程技术版),2019,52(07):745-753.[doi:10.11784/tdxbz201810034]
 Liu Liyan,Su Tong,Guo Kai,et al.Simulation of Two-Phase Flow on the Secondary Side of PWR Steam Generator[J].Journal of Tianjin University(Science and Technology),2019,52(07):745-753.[doi:10.11784/tdxbz201810034]
点击复制

压水堆核电站蒸汽发生器二次侧两相流流场特性模拟

参考文献/References:

[1] Smith J C,Akeroyd J K. Applying experience in an advanced design(steam generators)[J]. Nuclear Engineering Internationa,1986,31(383):83-86.
[2] 叶 杰,蔡 伟,陈文虎. AP1000多根蒸汽发生器传热管破裂分析[J]. 原子能科学技术,2015,49(6):1057-1061. Ye Jie,Cai Wei,Chen Wenhu. Analysis of multiple steam generator tube rupture for AP1000[J]. Atomic Energy Science and Technology,2015,49(6):1057-1061(in Chinese).
[3] 杨 健,朱文韬. 蒸汽发生器传热管诱发破裂风险评估[J]. 核动力工程,2017,38(1):51-55. Yang Jian,Zhu Wentao. Risk evaluation for induced steam generator tube rupture[J]. Nuclear Power Engineering,2017,38(1):51-55(in Chinese).

[4] Qi J,Zhou K,Huang J,et al. Numerical simulation of the heat transfer of superheater tubes in power plants considering oxide scale[J]. International Journal of Heat and Mass Transfer,2018,122:929-938.
[5] 刘春江,赵明恩,郭 凯,等. 基于流型结构构造的混合设备优化设计方法[J]. 天津大学学报:自然科学与工程技术版,2015,48(3):255-261. Liu Chunjiang,Zhao Ming’en,Guo Kai,et al. An approach to mixing equipment optimization based on flow pattern construction[J]. Journal of Tianjin University:Science and Technology,2015,48(3):255-261(in Chinese).
[6] Singhal A K,Srikantiah G. A review of thermal hydraulic analysis methodology for PWR steam generators and ATHOS3 code applications[J]. Progress in Nuclear Energy,1991,25(1):7-70.
[7] Patankar S V,Spalding D B. Computer analysis of the three-dimensional flow and heat transfer in a steam generator[J]. Forschung im Ingenieurwesen , 1978 ,44(2):47-52.
[8] Patankar S V,Spalding D B. A calculation procedure for the transient and steady-state behavior of shell-and-tube heat exchangers[G]// Afgan N H,Schlunder E U. Heat Exchangers:Design and Theory Sourcebook. United States:Scripta Book Company,1974:156-176.
[9] Lu Daogang,Wang Yu,Yuan Bo,et al. Development of three-dimensional thermal-hydraulic analysis code for steam generator with two-fluid model and porous media approach[J]. Applied Thermal Engineering,2017,116:663-676.
[10] Hovi V,Pättikangas T,Riikonen V. Coupled onedimensional and CFD models for the simulation of steam generators[J]. Nuclear Engineering and Design,2016,310:93-111.
[11] Cong Tenglong,Zhang Rui,Tian Wenxi,et al. Effects of power level on thermal-hydraulic characteristics of steam generator[J]. Progress in Nuclear Energy,2015,81:245-253.
[12] Cong Tenglong,Tian Wenxi,Qiu Suizheng,et al. Study on secondary side flow of steam generator with coupled heat transfer from primary to secondary side [J]. Applied Thermal Engineering,2013,61(2):519-530.
[13] 何 杰,高腾飞,罗文媛,等. 规整填料塔内气-液两相并流流动的CFD 研究[J]. 化学工业与工程,2017,34(1):76-83. He Jie,Gao Tengfei,Luo Wenyuan,et al. Study on gas-liquid co-current flow in structured packing column by computational fluid dynamics[J]. Chemical Industry and Engineering,2017,34(1):76-83(in Chinese).
[14] Chull J J,Jun J J,Jo Y B,et al. Numerical prediction of a flashing flow of saturated water at high pressure[J]. Nuclear Engineering and Technology,2018,50(7):1173-1183.
[15] Schlichting H,Gersten K. Boundary-Layer Theory [M].Berlin:Springer-Verlag,2017.
[16] Launder B E,Spalding D B. Mathematical Models of Turbulence[M]. United States:Academic Press,1972. 
[17] Jiang F,Jiang T,Qi G P,et al. Effect of flow directions on multiphase flow boiling neat transfer enhanced by suspending particles in a circulating evaporation system[J]. Transactions of Tianjin Univeristy,2019,25(3):201-213(in Chinese).

备注/Memo

通信作者:谭 蔚,wtan@tju.edu.cn.

更新日期/Last Update: 2019-05-10