PDF下载 分享
[1]徐龙河,刘嘉琳.自复位耗能支撑钢板剪力墙的滞回性能研究[J].天津大学学报(自然科学版),2018,(09):949-956.[doi:10.11784/tdxbz201706026]
 Xu Longhe,Liu Jialin.Hysteretic Behavior of Steel Plate Shear Wall with Self-Centering Energy Dissipation Braces[J].Journal of Tianjin University,2018,(09):949-956.[doi:10.11784/tdxbz201706026]
点击复制

自复位耗能支撑钢板剪力墙的滞回性能研究

参考文献/References:

[1] Driver R G, Kulak G L, Kennedy D J L, et al. Cyclic test of four-story steel plate shear wall[J]. Journal of Structural Engineering, 1998, 124(2):112-120.
[2] Sabouri-Ghomi S, Roberts T M. Nonlinear dynamic analysis of steel plate shear walls including shear and bending deformations[J]. Engineering Structures, 1992, 14(5):309-317.
[3] Caccese V, Elgaaly M, Chen R. Experimental study of thin steel-plate shear walls under cyclic load[J]. Journal of Structural Engineering, 1993, 119(2):573-587.
[4] Elgaaly M. Thin steel plate shear walls behavior and analysis[J]. Thin-Walled Structures, 1998, 32(1/2/3):151-180.
[5] 郭彦林, 缪友武, 董全利. 全加劲两侧开缝钢板剪力墙弹性屈曲研究[J]. 建筑钢结构进展, 2007, 9(3):58-62.
Guo Yanlin, Miao Youwu, Dong Quanli. Elastic buckling behavior of stiffened steel plate shear walls slotted at two edges[J]. Progress in Steel Building Structures, 2007, 9(3):58-62(in Chinese).
[6] 郭彦林, 周明. 钢板剪力墙的分类及性能[J]. 建筑科学与工程学报, 2009, 26(3):1-13.
Guo Yanlin, Zhou Ming. Categorization and performance of steel plate shear wall[J]. Journal of Architecture and Civil Engineering, 2009, 26(3):1-13(in Chinese).
[7] Kurata M, Leon R T, DesRoches R, et al. Steel plate shear wall with tension-bracing for seismic rehabilitation of steel frames[J]. Journal of Constructional Steel Research, 2012, 71(1):92-103.
[8] Clayton P M, Winkley T B, Berman J W, et al. Experimental investigation of self-centering steel plate shear walls[J]. Journal of Structural Engineering, 2011, 138(7):952-960.
[9] Clayton P M, Berman J W, Lowes L N. Seismic design and performance of self-centering steel plate shear walls [J]. Journal of Structural Engineering, 2011, 138(1):22-30.
[10] Ibarra L F, Medina R A, Krawinkler H. Hysteretic models that incorporate strength and stiffness deterioration[J]. Earthquake Engineering & Structural Dynamics, 2005, 34(12):1489-1511.
[11] Xu L H, Fan X W, Lu D C, et al. Hysteretic behavior studies of self-centering energy dissipation bracing system[J]. Steel and Composite Structures, 2016, 20(6):1205-1219.
[12] Xu L H, Fan X W, Li Z X. Cyclic behavior and failure mechanism of self-centering energy dissipation braces with pre-pressed combination disc springs[J]. Earthquake Engineering & Structural Dynamics, 2017, 46:1065-1080.
[13] 樊晓伟, 徐龙河, 逯登成. 新型自恢复耗能支撑框架结构抗震性能分析[J]. 天津大学学报:自然科学与工程技术版, 2016, 49(4):385-391.
Fan Xiaowei, Xu Longhe, Lu Dengcheng. Seismic performance analysis of new self-centering energy dissipation braced frame structure[J]. Journal of Tianjin University:Science and Technology, 2016, 49(4):385-391(in Chinese).
[14] 徐龙河, 代长顺, 逯登成, 等. 自恢复耗能支撑框架结构滞回特性模拟分析[J]. 天津大学学报:自然科学与工程技术版, 2016, 49(10):1049-1054.
Xu Longhe, Dai Changshun, Lu Dengcheng, et al.
Simulation of hysteretic behavior of self-centering energy dissipation braced frame structure[J]. Journal of Tianjin University:Science and Technology, 2016, 49(10):1049-1054(in Chinese).
[15] 徐龙河, 樊晓伟, 代长顺, 等. 预压弹簧自恢复耗能支撑受力性能分析与试验研究[J]. 建筑结构学报, 2016, 37(9):142-148.
Xu Longhe, Fan Xiaowei, Dai Changshun, et al. Mechanical behavior analysis and experimental study on pre-pressed spring self-centering energy dissipation brace [J]. Journal of Building Structures, 2016, 37(9):142-148(in Chinese).
[16] 哈尔滨工业大学. JGJ/T 380—2015钢板剪力墙技术规程[S]. 北京:中国建筑工业出版社, 2016.
Harbin Institute of Technology. JGJ/T 380—2015 Technical Specification for Steel Plate Shear Walls[S]. Beijing:China Architecture & Building Press, 2016(in Chinese).
[17] Clayton P M, Berman J W, Lowes L N. Seismic performance of self-centering steel plate shear walls with beam-only-connected web plates[J]. Journal of Constructional Steel Research, 2015, 106:198-208.
[18] Xu L H, Fan X W, Li Z X. Development and experimental verification of a pre-pressed spring self-centering energy dissipation brace[J]. Engineering Structures, 2016, 127:49-61.

相似文献/References:

[1]牟在根,张福建,李黎明. 两边连接竖向加劲式钢板剪力墙简化模型[J].天津大学学报(自然科学版),2014,(增刊):30.
 Mu Zaigen,Zhang Fujian,Li Liming. Simplified Model for Two-Side Constraint Steel Plate Shear Wall(SPSW)with Vertical Stiffeners[J].Journal of Tianjin University,2014,(09):30.
[2]李 然,郭兰慧,张素梅.钢板剪力墙滞回性能分析与简化模型[J].天津大学学报(自然科学版),2010,(10):919.
 LI Ran,GUO Lan-hui,ZHANG Su-mei.Hysteretic Analysis and Simplified Model of Steel Plate Shear Wall[J].Journal of Tianjin University,2010,(09):919.
[3]赵秋红,郝博超,李楠.钢板剪力墙简化分析模型研究[J].天津大学学报(自然科学版),2017,(增刊):42.[doi:10.11784/tdxbz201704104]
 Zhao Qiuhong,Hao Bochao,Li Nan.Simplified Analytical Models of Steel Plate Shear Walls[J].Journal of Tianjin University,2017,(09):42.[doi:10.11784/tdxbz201704104]

备注/Memo

收稿日期: 2017-06-09; 修回日期: 2018-03-26.
作者简介: 徐龙河(1976—), 男, 博士, 教授.
通讯作者: 徐龙河, lhxu@bjtu.edu.cn.
基金项目: 国家自然科学基金资助项目(51578058); 北京市自然科学基金资助项目(8172038).
Supported by the National Natural Science Foundation of China(No. 51578058)and the Natural Science Foundation of Beijing, China
(No. 8172038)

更新日期/Last Update: 2018-09-10