|本期目录/Table of Contents|

[1]罗震,解龑,崔霜林.基于三维重构技术的K-TIG熔池流动表征[J].天津大学学报(自然科学版),2018,(05):517-521.[doi:10.11784/tdxbz201705072]
 Luo Zhen,Xie Yan,Cui Shuanglin.Morphology Characterization of Molten Pool Flow Behavior During K-TIG Welding Based on 3D Reconstruction Techniques[J].Journal of Tianjin University,2018,(05):517-521.[doi:10.11784/tdxbz201705072]
点击复制

基于三维重构技术的K-TIG熔池流动表征()
分享到:

《天津大学学报(自然科学版)》[ISSN:0493-2137/CN:12-1127/N]

卷:
期数:
2018年05
页码:
517-521
栏目:
论文
出版日期:
2018-05-15

文章信息/Info

Title:
Morphology Characterization of Molten Pool Flow Behavior During K-TIG Welding Based on 3D Reconstruction Techniques
文章编号:
0493-2137(2018)05-0517-05
作者:
罗震 解龑 崔霜林
天津大学材料科学与工程学院,天津 300350
Author(s):
Luo ZhenXie YanCui Shuanglin
School of Materials Science and Engineering,Tianjin University,Tianjin 300350,China
关键词:
K-TIG焊接 三维重构 元素示踪 熔池流动行为 430不锈钢
Keywords:
K-TIG welding 3D reconstruction elemental tracer molten pool flow behavior 430 stainless steel
分类号:
TG453.9
DOI:
10.11784/tdxbz201705072
文献标志码:
A
摘要:
采用钛元素示踪方法表征K-TIG焊接430不锈钢熔池流动行为,在完全熔透焊缝中观察到熔池沿板厚方向分为3个区域,包括马兰格尼对流圈、洛伦兹力推动的对流圈及中间过渡区域; 未熔透时熔池中只有马兰格尼对流圈及对流圈与熔池边缘之间的区域.基于连续金相切片的三维重构技术建立了熔池小孔附近流动未稳定区的三维模型与未熔透情况下气孔处焊缝的三维模型.观察了K-TIG熔池流动由未稳定过渡至稳定的过程,小孔前壁只有很薄的一层液态金属流动层,液态金属沿小孔侧壁流动至后方熔池中,熔池在小孔后部开始形成马兰格尼对流圈,在小孔形成后一段距离之后,开始形成洛伦兹力推动的对流圈.未熔透时熔池流动行为明显弱于熔透时熔池流动行为,对流流动减弱易于造成气孔的产生.
Abstract:
Titanium tracer was introduced to characterize the K-TIG molten pool flow behavior of 430 stainless steel. When fully penetrated,the molten pool consisted of three parts along the thickness direction,which were Marangoni convection,a convection driven by Lorentz force,and a transition layer. When incompletely penetrated,the molten pool consisted of two parts along the thickness direction,which were Marangoni convection and a transition layer between the convection and molten pool edge. 3D models of the flow behavior in the unsteady region around the key-hole and the porosity in the incompletely penetrated weld were established based on serial sectioning reconstruction techniques. The stabilization process of K-TIG molten pool was observed. There was a thin layer of molten metal on the anterior wall of the key-hole. Molten metal flowed along the side wall to the rear of the molten pool,and the Marangoni convection came into being at the end of the key-hole. The convection driven by Lorentz force appeared in a short distance after the key-hole formed. The flow of molten pool was obviously weak when incompletely penetrated. The loss of convection flow tended to cause porosity.

参考文献/References:

[1] Jarvis B J. Keyhole Gas Tungsten Arc Welding:A New Process Variant[D]. Wollongong:University of Wollongong, 2001.
[2] Feng Y, Luo Z, Liu Z, et al. Keyhole gas tungsten arc
welding of AISI 316L stainless steel[J]. Materials & Design, 2015, 85(1):24-31.
[3] Bachmann M, Avilov V, Gumenyuk A, et al. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts[J]. International Journal of Heat & Mass Transfer, 2013, 60(60):309-321.
[4] Yamasaki S, Mitsuhara M, Ikeda K, et al. 3D visualization of dislocation arrangement using scanning electron microscope serial sectioning method[J]. Scripta Materialia, 2015, 101(2):80-83.
[5] Li S, Chen G, Zhang M, et al. Dynamic keyhole profile during high-power deep-penetration laser welding [J]. Journal of Materials Processing Technology, 2014, 214(3):565-570.
[6] Kou S. Welding Metallurgy[M]. 2nd ed. Hoboken:John Wiley and Sons, 2003.
[7] Kou S, Wang Y H. Computer simulation of convection in moving arc weld pools[J]. Metallurgical and Materials Transactions A, 1986, 17(12):2271-2277.
[8] Chen X, Pang S, Shao X, et al. Three-dimensional transient thermoelectric currents in deep penetration laser welding of austenite stainless steel[J]. Optics & Lasers in Engineering, 2017, 91(1):196-205.
[9] Zou J L, Wu S K, He Y, et al. Distinct morphology of keyhole wall during high power fibre laser deep penetration welding[J]. Science & Technology of Welding & Joining, 2015, 20(8):655-658.

备注/Memo

备注/Memo:
收稿日期: 2017-05-16; 修回日期: 2017-09-22.
作者简介: 罗震(1967—), 男, 博士, 教授.
通讯作者: 罗震, lz_tju@163.com.
基金项目: 国家自然科学基金资助项目(51405334).
Supported by the National Natural Science Foundation of China(No.,51405334).
更新日期/Last Update: 2018-05-10