PDF下载 分享
[1]陈宏威,向建华,左正兴,等.面向组合结构刚度非线性特性的等效模型[J].天津大学学报(自然科学版),2018,(02):190-195.[doi:10.11784/tdxbz201705022]
 Chen Hongwei,Xiang Jianhua,Zuo Zhengxing,et al.Non-Linear Characters of Stiffness of Combination Structure Based on Equivalent Model[J].Journal of Tianjin University,2018,(02):190-195.[doi:10.11784/tdxbz201705022]
点击复制

面向组合结构刚度非线性特性的等效模型

参考文献/References:

[1] 罗永峰, 王熹宇, 强旭红, 等. 高强钢在工程结构中的应用进展[J]. 天津大学学报:自然科学与工程技版, 2015, 48(增1):134-141.
Luo Yongfeng, Wang Xiyu, Qiang Xuhong, et al. Progress in application of high strength steel to engineering structures[J]. Journal of Tianjin University:Science and Technology, 2015, 48(Suppl 1):134-141(in Chinese).
[2] 王元清, 罗睿奇, 肖建春, 等. 负载下焊接加固钢结构端板连接节点承载性能试验[J]. 天津大学学报:自然科学与工程技术版, 2015, 48(增1):25-31.
Wang Yuanqing, Luo Ruiqi, Xiao Jianchun, et al. Experiment of welding reinforcement of end-plate connection nodes in steel-structure under loads[J]. Journal of Tianjin University:Science and Technology, 2015, 48(Suppl 1):25-31(in Chinese).
[3] 祖炳锋, 徐玉梁, 刘捷, 等. 车用柴油机缸孔变形整体接触多场分步耦合模拟[J]. 天津大学学报, 2009, 42(11):1011-1016.
Zu Bingfeng, Xu Yuliang, Liu Jie, et al. Simulation on cylinder bore deformation of automotive disel engines using integral contact multi-field indirect coupling method[J]. Journal of Tianjin University, 2009, 42(11):1011-1016(in Chinese).
[4] Lima L R O D, Freire J L D F, Vellasco P C G D S, et al. Structural assessment of minoraxis steel joints using photoelasticity and finite elements[J]. Journal of Constructional Steel Research, 2009, 65(2):466-478.
[5] 张红艳, 白长青, 林旭, 等. 螺栓连接接触非线性对钢结构动力学特性的影响[J]. 应用力学学报, 2015, 32(4):570-574.
Zhang Hongyan, Bai Changqing, Lin Xu, et al. Influence of non-linearity of bolted connection on dynamic characteristics of steel structure[J]. Chinese Journal of Applied Mechanics, 2015, 32(4):570-574(in Chinese).
[6] Liu P, Zhao H, Huang K, et al. Research on normal contact stiffness of rough surface considering friction based on fractal theory[J]. Applied Surface Science, 2015, 349:43-48.
[7] 温淑花, 张学良, 武美先, 等. 结合面法向接触刚度分形模型建立与仿真[J]. 农业机械学报, 2009, 40(11):197-202.
Wen Shuhua, Zhang Xueliang, Wu Meixian, et al. Fractal model of normal contact stiffness of joint interfaces and its simulation[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(11):197-202(in Chinese).
[8] 温淑花, 张学良, 文晓光, 等. 结合面切向接触刚度分形模型建立与仿真[J]. 农业机械学报, 2009, 40(12):223-227.
Wen Shuhua, Zhang Xueliang, Wen Xiaoguang, et al. Fractal model of tangential contact stiffness of jointinterfaces and its simulation[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(12):223-227(in Chinese).
[9] Tinker M L. Nonlinearities due to joint friction and clearance in a structural dynamic test figure[C]//ASME Proceedings of the Symposium on Elasto-Impact and Friction in Dynamic Systems. USA, 1996, 90:35-46.
[10] 张琪昌, 耿岩, 王辰, 等. 模型修正技术在螺栓连接结构中的应用探讨[J]. 天津大学学报:自然科学与工程技术版, 2014, 47(12):1095-1100.
Zhang Qichang, Geng Yan, Wang Chen, et al. Application of model updating to bolted joint structures[J]. Journal of Tianjin University:Science and Technology, 2014, 47(12):1095-1100(in Chinese).
[11] 栾宇. 航天器结构中螺栓-法兰连接的动力学建模方法研究[D]. 大连:大连理工大学机械工程学院, 2012.
Luan Yu. Study on Dynamic Modeling of Bolted Flange Connections in Aerospace Structures[D]. Dalian:School of Mechanical Engineering, Dalian University of Technology, 2012(in Chinese).
[12] 黄开放. 螺栓固定结合面动力学建模与影响因素研究[D]. 武汉:华中科技大学机械科学与工程学院, 2012.
Huang Kaifang. A Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Engineering[D]. Wuhan:School of Mechanical Science & Engineering, Huazhong University of Science and Technology, 2012(in Chinese).
[13] Loureiro A, Gutierrez R, Reinosa J M, et al. Axial stiffness prediction of non-preloaded T-stubs:An analytical frame approach[J]. Journal of Constructional Steel Research, 2010, 66(12):1516-1522.
[14] 侯世远. 螺纹联接松动机理研究[D]. 北京:北京理工大学机械与车辆学院, 2015.
Hou Shiyuan. Study on Mechanism of Loosening of Threaded[D]. Beijing:School of Mechanical Engineering, Beijing Institute of Technology, 2015(in Chinese).
[15] Grosse I R, Mitchell L D. Nonlinear axial stiffness characteristics of bolted joints[J]. Journal of Mechanical Design, 1990, 122:442-449.

备注/Memo

收稿日期: 2017-05-09; 修回日期: 2017-06-29.
作者简介: 陈宏威(1991—), 男, 博士研究生, colin_chenhw@foxmail.com.
通讯作者: 向建华, xiangjh@bit.edu.cn.
网络出版时间: 2017-09-19.网络出版地址: http://kns.cnki.net/kcms/detail/12.1127.N.20170919.0915.002.html.
基金项目: 国家自然科学基金资助项目(51275043).
Supported by the National Natural Science Foundation of China(No. 51275043).

更新日期/Last Update: 2018-02-10