PDF下载 分享
[1]裴毅强,王琨,王同金,等.GDI喷油器超高压乙醇喷雾微观特性试验[J].天津大学学报(自然科学版),2018,(02):181-189.[doi:10.11784/tdxbz201704015]
 Pei Yiqiang,Wang Kun,Wang Tongjin,et al.Experimental on Microscopic Spray Characteristics of GDI Injector Fueled with Ethanol Under Ultra-High Injection Pressure[J].Journal of Tianjin University,2018,(02):181-189.[doi:10.11784/tdxbz201704015]
点击复制

GDI喷油器超高压乙醇喷雾微观特性试验

参考文献/References:

[1] Soid S N, Zainal Z A. Spray and combustion characterization for internal combustion engines using optical measuring techniques:A review[J]. Energy, 2011, 36(2):724-741.
[2] Lee S, Oh Y, Park S. Characterization of the spray atomization process of a multi-hole gasoline direct injector based on measurements using a phase Doppler particle analyser[J]. Proceedings of the Institution of Mechanical Engineers, Part D:Journal of Automobile Engineering, 2013, 227(7):951-965.
[3] 李翔, 裴毅强, 秦静, 等. 壁温和机油油膜对喷雾撞壁后发展的影响[J]. 天津大学学报:自然科学与工程技术版, 2016, 49(11):1195-1202.
Li Xiang, Pei Yiqiang, Qin Jing, et al. Effects of wall temperature and oil film on the process of a gasoline spray after wall impingement[J]. Journal of Tianjin University:Science and Technology, 2016, 49(11):1195-1202(in Chinese).
[4] Zhao F, Lai M C, Harrington D L. Automotive spark-ignited direct-injection gasoline engines[J]. Progress in Energy and Combustion Science, 1999, 25(5):437-562.
[5] Guo H, Ma X, Li Y, et al. Effect of flash boiling on microscopic and macroscopic spray characteristics in optical GDI engine[J]. Fuel, 2017, 190:79-89.
[6] Wang C, Xu H, Herreros J M, et al. Impact of fuel and injection system on particle emissions from a GDI engine[J]. Applied Energy, 2014, 132:178-191.
[7] Frottier C, Sens M, Rie? M, et al. Achieving very low PN emissions with an advanced multi-hole injector functionality and adapted spray targeting under high fuel pressure conditions[J]. SAE International Journal of Engines, 2014, 7(4):1744-1751.
[8] Gao J, Jiang D, Huang Z. Spray properties of alternative uels:A comparative analysis of ethanol-gasoline blends and gasoline[J]. Fuel, 2007, 86(10):1645-1650.
[9] Catapano F, Sementa P, Vaglieco B M. Air-fuel mixing and combustion behavior of gasoline-ethanol blends in a GDI wall-guided turbocharged multi-cylinder optical engine[J]. Renewable Energy, 2016, 96:319-332.
[10] Sileghem L, Ickes A, Wallner T, et al. Experimental investigation of a DISI production engine fuelled with methanol, ethanol, butanol and ISO-stoichiometric alcohol blends[J/OL]. SAE Technical Paper, 2015:10. 4271/2015-01-0768.
[11] Brusstar M, Stuhldreher M, Swain D, et al. High efficiency and low emissions from a port-injected engine with neat alcohol fuels[J/OL]. SAE Technical Paper, 2002:10. 4271/2002-01-2743.
[12] 李雁飞, 郭恒杰, 王建昕, 等. 高背压下 GDI 油束喷雾特性的试验[J]. 内燃机学报, 2016, 34(4):326-333.
Li Yanfei, Guo Hengjie, Wang Jianxin, et al. Experiment on spray characteristics of GDI jet under elevated ambient pressure[J]. Transactions of CSICE, 2016, 34(4):326-333(in Chinese).
[13] Aleiferis P G, van Romunde Z R. An analysis of spray development with iso-octane, n-pentane, gasoline, ethanol and n-butanol from a multi-hole injector under hot fuel conditions[J]. Fuel, 2013, 105:143-168.
[14] Park S H, Kim H J, Suh H K, et al. Atomization and
spray characteristics of bioethanol and bioethanol blended gasoline fuel injected through a direct injection gasoline injector[J]. International Journal of Heat and Fluid Flow, 2009, 30(6):1183-1192.
[15] Lee S, Park S. Experimental study on spray break-up and atomization processes from GDI injector using high injection pressure up to 30 MPa[J]. International Journal of Heat and Fluid Flow, 2014, 45:14-22.
[16] Song J, Park S. Effect of injection strategy on the spray development process in a single-cylinder optical GDi engine[J]. Atomization and Sprays, 2015, 25(9):819-836.
[17] Hung D L S, Harrington D L, Gandhi A H, et al. Gasoline fuel injector spray measurement and characterization—A new SAE J2715 recommended practice[J]. SAE International Journal of Fuels and Lubricants, 2009, 1(1):534-548.
[18] Ishikawa N, Niimura K. Analysis of diesel spray structure using magnified photography and PIV[J/OL]. SAE Technical Paper, 1996:10. 4271/960770.

相似文献/References:

[1]史宗庄,马其诚,崔国起,等.双杆共轴超高压液压剪的平衡计算和优化设计[J].天津大学学报(自然科学版),1998,(02):155.
[2]徐庆春.有負載振動時電力系統的靜穩定問題[J].天津大学学报(自然科学版),1959,(02):13.
[3]裴毅强,王琨,张丹,等.GDI喷油器超高压乙醇喷雾的宏观特性[J].天津大学学报(自然科学版),2018,(07):755.[doi:10.11784/tdxbz201706059]
 Pei Yiqiang,Wang Kun,Zhang Dan,et al.Spray Macroscopic Characteristics of GDI Injector Fueled with Ethanol Using Ultra-High Injection Pressure[J].Journal of Tianjin University,2018,(02):755.[doi:10.11784/tdxbz201706059]

备注/Memo

收稿日期: 2017-04-06; 修回日期: 2017-05-18.
作者简介: 裴毅强(1967—), 男, 博士, 副教授.
通讯作者: 裴毅强, peiyq@tju.edu.cn.
基金项目: 国家科技支撑计划项目(2014BAG10B01).
Supported by the National Key Techology Research and Development Program of the Ministry of Science and Tecnology of China
,(No.,2014BAG10B01).

更新日期/Last Update: 2018-02-10