|本期目录/Table of Contents|

[1]杨 帅,王太勇.竖直方向弹性约束悬臂梁的固有频率分析[J].天津大学学报(自然科学版),2011,(01):18-22.
 YANG Shuai,WANG Tai-yong.Nature Frequency Analysis of a Cantilever Beam with Elastic Restraint in Vertical Direction[J].Journal of Tianjin University,2011,(01):18-22.
点击复制

竖直方向弹性约束悬臂梁的固有频率分析()
分享到:

《天津大学学报(自然科学版)》[ISSN:0493-2137/CN:12-1127/N]

卷:
期数:
2011年01
页码:
18-22
栏目:
机械工程
出版日期:
2011-01-15

文章信息/Info

Title:
Nature Frequency Analysis of a Cantilever Beam with Elastic Restraint in Vertical Direction
作者:
杨 帅王太勇
(天津大学机械工程学院,天津 300072)
Author(s):
YANG ShuaiWANG Tai-yong
(School of Mechanical Engineering,Tianjin University,Tianjin 300072,China)
关键词:
悬臂梁弹性约束固有频率模态有限元
Keywords:
cantilever beamelastic restraintnature frequencymodefinite element
分类号:
TH113.1
文献标志码:
A
摘要:
针对固定端部竖直方向为弹性约束的悬臂梁结构进行了模态分析.用欧拉-伯努利梁模型,推导出前3 阶固有频率方程和振型函数.针对不同刚度,采用数值方法求解固有频率方程,得到固有频率随约束刚度变化的关系曲线.运用最小二乘法对该曲线进行函数拟合. 以不同尺度梁为例,通过有限元方法对该拟合函数的正确性进行了验证,其误差小于2%.应用该函数,通过固有频率对端部刚度进行识别,其误差小于6%.
Abstract:
Modal analysis of a cantilever beam with elastic support in vertical direction was conducted. With Bernoulli-Euler beam model,the first three nature frequency equations and the vibration mode functions were obtained.With different stiffness,the nature frequency equations were solved using numerical method. The relationship curves between support stiffness and nature frequency were acquired,and the corresponding functions were fitted with least square method. To beams in different scales,the accuracy of the functions was validated using finite element method,and the relative error was less than 2%. Based on the functions and nature frequency,the support stiffness was identified and the relative error was less than 6%.

备注/Memo

备注/Memo:
通讯作者:王太勇,tywang@tdme.tju.edu.cn.
更新日期/Last Update: 2011-01-15