|本期目录/Table of Contents|

[1]许立新,杨玉虎,刘建平,等. 链传动啮合冲击理论分析及有限元模拟[J].天津大学学报(自然科学版),2010,(02):132-137.
 XU Li-xin,YANG Yu-hu,LIU Jian-ping,et al. Theoretical Analysis and Finite Element Simulation of the Meshing Impact of Roller Chain Drive[J].Journal of Tianjin University,2010,(02):132-137.
点击复制

 链传动啮合冲击理论分析及有限元模拟()
分享到:

《天津大学学报(自然科学版)》[ISSN:0493-2137/CN:12-1127/N]

卷:
期数:
2010年02
页码:
132-137
栏目:
机械工程
出版日期:
2010-02-15

文章信息/Info

Title:
 Theoretical Analysis and Finite Element Simulation of the Meshing Impact of Roller Chain Drive
作者:
 许立新杨玉虎刘建平张思献
 天津大学机械工程学院,天津 300072
Author(s):
 XU Li-xinYANG Yu-huLIU Jian-pingZHANG Si-xian
 School of Mechanical Engineering,Tianjin University,Tianjin 300072,China
关键词:
 滚子链动应力啮合冲击有限元方法
Keywords:
 roller chaindynamic stressmeshing impactfinite element method
分类号:
TH12.4
文献标志码:
A
摘要:
 啮合冲击是引发链传动产生振动、噪声以及链条零部件发生疲劳损坏的主要原因,因此,精确地分析与计算啮合冲击载荷是进行轮齿强度计算以及链传动系统动力学研究的重要内容.为此,建立了链轮轮齿滚子间啮合冲击动力学模型,计算了啮合冲击力幅值;采用赫兹接触理论,对齿面接触应力进行了静态条件下的理论计算;建立了套筒滚子链传动系统有限元模型,采用三维弹性接触问题有限元分析方法,对轮齿滚子间的啮合冲击效应进行了精确模拟,分析了具有标准齿廓形状轮齿滚子瞬时啮合时,冲击载荷变化规律及应力分布情况.计算结果表明:在动态条件下轮齿滚子作为弹性体发生冲击接触时,接触区域变形并非理想的长方形区域;轮齿齿面的冲击接触力分布是不均匀的;在理论接触区域两侧冲击应力较大;在考虑了链轮齿形、间隙及弹性变形等多种影响因素的条件下,动态冲击载荷远大于静态条件下的理论计算值.
Abstract:
 Meshing impact is the main reason for vibration,noise and fatigue damage of parts in chain drives. Therefore,accurate analysis and calculation of the meshing impact load are important both for tooth strength calculation and the re-search on dynamics of chain system. In this paper,the dynamic model of the meshing impact between sprocket tooth and roller has been developed and the amplitude of meshing impact force has been calculated. The theoretical contact stress on the tooth surface under static condition has been calculated using Hertz contact theory. The finite element model of roller chain drive system has been developed and the effect of meshing impact has been simulated accurately with finiteelement method for 3-D elastic contact problems. The variation of impact load and the distribution of stresses have been analyzed when instantaneous meshing effect occurs between roller and sprocket tooth with standard geometry. Calculation results show that the contact deformation under impact effect is not an ideal rectangular,when the tooth and roller are considered elastic bodies under dynamic condition. The distribution of impact force on the tooth surface is much uneven and the impact stresses on both sides of the theoretical contact region are greater. It is also observed that the dynamic impact load is much larger than the theoretical value under static condition when various factors such as the standard geometry of sprocket tooth,clearance and elastic deformation are taken into consideration.

相似文献/References:

[1]徐可欣,崔厚欣,王文波. 血糖无创伤检测技术的基础研究[J].天津大学学报(自然科学版),2003,(02):133.
[2]李庆波,徐可欣,汪!日燕. 人体血糖浓度无创伤检测的必要测量条件[J].天津大学学报(自然科学版),2003,(02):139.
[3]胡小唐,陈津平,胡晓东,等. 外界振动对SPM测量结果的影响[J].天津大学学报(自然科学版),2003,(02):143.
[4]赵 臣,阴炳皓,韩晓军.TSR-1型微型足球机器人视觉系统的研究[J].天津大学学报(自然科学版),2003,(06):659.
[5]刘!征,赵小松,张国雄,等. 自由曲面多目视觉检测技术[J].天津大学学报(自然科学版),2003,(02):148.
[6]张金利,杨雪松,李!韦华,等. 非离子型表面活性剂水溶液胶团特性模型[J].天津大学学报(自然科学版),2003,(02):152.
[7]王洪礼,李强,竺致文. 梯度算法在转子时变控制中的应用[J].天津大学学报(自然科学版),2003,(02):156.
[8]张颖,顾平,谭丁. 膜混凝反应器处理轻度污染地表水[J].天津大学学报(自然科学版),2003,(02):187.
[9]杨长生,马沛生,夏淑倩. 差热分析法测定多元醇的比热[J].天津大学学报(自然科学版),2003,(02):192.
[10]于九皋,刘峰,于璟琳. 包覆包醛氧淀粉固定脲酶制备及对尿素吸附[J].天津大学学报(自然科学版),2003,(02):197.

备注/Memo

备注/Memo:
 通讯作者:杨玉虎,yangyuhu@tju.edu.cn.
更新日期/Last Update: