|本期目录/Table of Contents|

 精密小型Hexapod并联机器人标定实验及精度分析(PDF)

《纳米技术与精密工程》[ISSN:1672-6030/CN:12-1351/O3]

期数:
2013年1期
页码:
34
栏目:
精密测量
出版日期:
2013-01-15

文章信息/Info

Title:
 Calibration Test and Precision Analysis of Small-Sized Hexapod Parallel Manipulator with High Accuracy
作者:
 张国庆 杜建军
 哈尔滨工业大学深圳研究生院,深圳518055
Author(s):
 Zhang Guoqing Du Jianjun
 Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055, China
关键词:
 HexapodStewart平台标定误差补偿测量
Keywords:
 Hexapod Stewart platform calibration error compensation measurement
分类号:
-
DOI:
-
文献标识码:
A
摘要:
 为了提高精密小型Hexapod并联机器人的运行精度,对机器人进行了标定实验及精度分析. 推导了Hexapod
机器人结构参数的误差模型、设计了标定步骤和算法,并在三坐标测量机上对机器人进行标定实验;从机构角度对
Hexapod机器人的间隙误差来源进行了分析,并推导了间隙误差对机器人位姿误差的映射关系数学模型;推导并分
析了计算过程中最小二乘误差、牛顿鄄拉普森迭代误差的数学模型,分析了机器人结构参数的辨识精度. 标定实验结
果表明:经过误差补偿,机器人位姿坐标的最大位移误差由0.267 6 mm降为0.010 5 mm;最大转角误差由0.006 8 rad
降为0.001 1 rad. Hexapod机器人标定及精度分析方法对于开发精密型并联机器人具有参考价值.
Abstract:
 To improve the accuracy of small-sized Hexapod parallel manipulator, calibration test and
precision analysis were conducted in this paper. An error model of Hexapod was derived, and calibra-
tion procedure was designed and calibration test was conducted on 3-coordinate measuring machine
(CMM). An analysis regarding the error sources of Hexapod was also conducted from the mechanical
angle, and a mapping model from the gap error to the pose error of Hexapod was derived. Then the er-
ror models of least square method and Newton-Raphson iteration method in the calculation were derived
and analyzed, and the identification accuracy for geometric parameters of Hexapod was analyzed. The
calibration results show that after calibration, the maximum translation error of Hexapod manipulator
declined from 0.267 6 mm to 0.010 5 mm, and the maximum rotation error declined from 0.006 8 rad
to 0.001 1 rad. The calibration method and precision analysis method of Hexapod have a reference val-
ue for developing high precision parallel manipulators.

参考文献/References

备注/Memo

备注/Memo:
更新日期/Last Update: 2013-02-22